Inkonzo yoshicilelo ye-3D yeenxalenye zeprototype ezikhawulezayo

inkcazelo emfutshane:

Ushicilelo lwe-3D (3DP) luhlobo lwetekhnoloji yokucofa ngokukhawuleza, ekwabizwa ngokuba yimveliso yokongeza. Yifayile yemodeli yedijithali esekelwe, usebenzisa isinyithi esingumgubo okanye iplastiki kunye nezinye izinto ezincamathelayo, ngokuprintwa kwe-layer-by-layer ukwakha.

Ngophuhliso oluqhubekayo lokuphuculwa kwemizi-mveliso, iinkqubo zemveli zokuvelisa azikwazanga ukuhlangabezana nokusetyenzwa kwamacandelo emizi-mveliso yanamhlanje, ngakumbi ezinye izakhiwo ezinokwakheka okukhethekileyo, ekunzima ukuvelisa okanye ukuvelisa ngeenkqubo zemveli. Itekhnoloji yoshicilelo ye-3D yenza yonke into inokwenzeka.

Ukwenziwa kweSiko:

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Iingenelo zoshicilelo lwe-3D?

● Ukuhanjiswa ngokukhawuleza kakhulu, iintsuku ezi-2-3 ezinokwenzeka
● Ixabiso eliphantsi kakhulu kunenkqubo yesintu.
● Itekhnoloji yoShicilelo lwe-3D igqabhuza kubugcisa bokwenziwa kwemveli. Yonke into inokwenzeka ukuba iprintwe.
● Ukuprintwa xa kukonke, akukho ndibano, konga ixesha nomsebenzi.
● Ukwahluka kweemveliso akuzonyusi iindleko.
● Ukuncitshiswa kokuxhomekeka kwizakhono ezenziweyo.
● Indibaniselwano yezinto eziphathekayo.
● Akukho nkunkuma yezinto zomsila.

Iindlela eziqhelekileyo zoshicilelo lwe-3D:

1. I-FDM: Nyibilika ukubunjwa kwe-deposition, eyona nto iphambili yi-ABS

2. I-SLA: Ukukhanya ukunyanga ukubumba okubolileyo, izinto eziphambili ziyi-photosensitive resin

3. I-DLP: I-Digital light processing molding, eyona nto ibalulekileyo yi-photosensitive resin

Umgaqo wokwenza iteknoloji ye-SLA kunye ne-DLP iyafana. Itekhnoloji ye-SLA yamkela i-laser polarization scanning point irradiation point, kwaye i-DLP yamkela itekhnoloji yedijithali yokuphonononga. Ukuchaneka kunye nesantya sokushicilela se-DLP singcono kunokuhlelwa kwe-SLA.

Zeziphi iintlobo zoshicilelo lwe-3D ezinokusingatha i-HY Metals?

I-FDM kunye ne-SLA zezona zisetyenziswa kwi-HY Metals.

Kwaye ezona zixhobo zisetyenziswa kakhulu yi-ABS kunye ne-photosensitive resin.

Ushicilelo lwe-3D lubiza kakhulu kwaye lukhawuleza kune-CNC machining okanye i-vaccum casting xa i-QTY iphantsi njengeseti ze-1-10, ngakumbi kwizakhiwo ezinzima.

Noko ke, ilinganiselwe ngezinto eziprintiweyo. Sinokuprinta kuphela iinxalenye zeplastiki kwaye sinciphise kakhulu iinxalenye zentsimbi ukuze. Kwaye kwakhona, umphezulu wamacandelo ashicilelweyo awugudi njengenxalenye yomatshini.

Ngaphambili: Uluhlu lwamaxabiso atshiphu amaxabiso eAluminiyam aMachining-Inkonzo yomatshini echanekileyo ye-CNC kubandakanya ukugaya kunye nokujika kunye ne-3 axis kunye noomatshini be-5 be-axis-HY Metals

Okulandelayo: Iprototype yentsimbi yeshiti kunye nokujika okufutshane

Bhala umyalezo wakho apha kwaye uwuthumele kuthi