Ukuqonda imisonto yomatshini: Isikhokelo esibanzi

Ekuqhubeni Ukuchanekaumatshinikwayeukuvelisa isikoUyilo, imisonto idlala indima ebalulekileyo ekuqinisekiseni ukuba izinto zilungele ngokukhuselekileyo kwaye zisebenze ngokufanelekileyo. Nokuba usebenza nezikrelemnqa, iibhotile, okanye ezinye izinto ezithengisayo, kubalulekile ukuqonda umahluko phakathi kwemisonto eyahlukeneyo. Kwezi bhlog, siya kuphonononga umahluko phakathi kwentambo yasekhohlo kunye nendawo elungileyo, i-Cound-i-Cound kunye neentambo ezimbini (okanye ezikhokelayo), kwaye zinike ulwazi ngakumbi kwinkcazo yemihla ngemihla.

• Intambo yasekunene kunye nentambo yasekhohlo

1.1Intambo yasekunene

Imisonto yasekunene yezandla ngolona hlobo luqhelekileyo lwentambo esetyenziswa ngomatshini. Ziyilelwe ukuqina xa iguquliwe ngokufuthi kwaye ikhululwe xa iguqukile. Le yindibano ye-thrim esemgangathweni kunye nezixhobo ezininzi, izintya kunye nezinto zenziwa ngemisonto yezandla yasekunene.

Isicelo:

-Injongo ngokubanzi kunye neebhotile

- uninzi lwamalungu omatshini

-Izinto zemihla ngemihla ezinje ngee-jars kunye neebhotile

1.2Intambo yesandla sasekhohlo

Kwelinye icala, imisonto yasekhohlo iqinile xa iguquliwe kwaye yakhulula i-rateclock kwaye yakhulula xa iguqukile. Le ntambo ayiqhelekanga kodwa ibalulekile kwizicelo ezithile apho intshukumo ejikelezayo yecandelo inokubangela intambo yelungelo lokukhulula.

Isicelo:

-Ientlobo ezithile zeziphatho zebhayisekile

- Ezinye iinxalenye zemoto (umzekelo, icala lasekhohlo)

-Umatshini okhethekileyo ubukhulu becala ukujikeleza okujikelezayo

1.3 Umahluko ophambili

-Undlela yokujikeleza: Imisonto yasekunene iqinisa iwashi; Imisonto yesandla sasekhohlo iqinisa i-counteclock.

-Iinjongo: Imisonto yasekunene yimigangatho; Imisonto yasekhohlo isetyenziselwa izicelo ezikhethekileyo ukuthintela ukukhulula ukukhulula.

• Intambo enye ekhokelayo kunye nentambo ephithiphileyo kabini

2.1 Intambo enye ekhokelayo

Imisonto enye ekhokelayo inentambo enye eqhubekayo ejikelezayo ejikeleze ishafti. Oku kuthetha ukuba kwinguqu nganye yescrew okanye i-bolt, iqhubela phambili kumgama olingana nentambo yentambo.

 Inqaku:

-Yilo olulula kunye nemveliso

-Ilungele izicelo ezifuna ukushukunyiswa kwe-precie

-Isiqhelo isetyenziselwa isikrweqe esiqhelekileyo kunye ne-bolts

2.2 Intambo enkulu ekhokelayo

Imisonto ekhokelayo ineentambo ezimbini ezifanayo, ke zaqhubela phambili kakhulu ngotshintsho. Umzekelo, ukuba intambo enye ekhokelayo ine-pitch ye-1 mm, umsonto ophindiweyo ophindiweyo one-2 mm iyonyuse i-2 mm inguquko nganye.

 Inqaku:

-Ukutshintsha kwendibano kunye nekati ngenxa yokwanda kwentshukumo yomgca

-Ilungele izicelo ezifuna uhlengahlengiso oluKhawulezayo okanye iNdibano rhoqo

-Ziqhelekile kwizikrelemnqa, ii-jacks kunye neentlobo ezithile zobalo

 2.3 Umahluko ophambili

-Imali yenkqubela phambili ngotshintsho ngalunye: intambo enye ekhokelayo iqhubela phambili kwinxalenye yabo; Imisonto ekhokelayo ephindwe kabini kwi-pitch nganye.

Isantya sokusebenza: Iintambo ezimbini ezikhokelayo zivumela intshukumo ngokukhawuleza, iyenza ilungele izicelo apho isantya sibalulekile.

• Ulwazi olongezelelekileyo lolwazi

3.1I-pitch

I-pitch ngumgama ophakathi kwemisonto ekufuphi kwaye ilinganiswe kwiimilimitha (iMetric) okanye imisonto nge-intshi nganye (imperial). Yinto ephambili ekumiseleni ngokuqinileyo indlela ehambelana ngayo kwaye ingakanani umthwalo onokuthi uhlale kuyo.

3.2Ukunyamezelana

Ukunyamezelana ngentambo kukuphambuka okufanelekileyo kwentambo kumda othile ochaziweyo. Ngenxa yokusetyenziswa ngokuchanekileyo, ukungangqinelani okuqinileyo kubalulekile, ngelixa kwiimeko ezinzima, ulungelelwaniso lwe-Loosel lwamkelekile.

3.3IFOMU

lZininzi iifom zeThrithi, kubandakanya:

-Imilinganiselo ye-Unicoyi ye-TARY (i-UTS): ixhaphakile e-United States, isetyenziselwa izinto ezahlukeneyo-injongo.

-I-metric i-metreas: isetyenziswe ngokubanzi kwihlabathi liphela kwaye ichazwe ngumbutho wamanye amazwe wokumisela umgangatho (i-ISO).

-Intambo ye-trapezoidal: Isetyenziswe kwizicelo zothumelo lwamandla, zibonisa imilo ye-trapezoidal yomthwalo ongcono.

3.4I-Thumi

Ukuphucula ukusebenza kunye nokukhusela ngokulalela, imisonto inokudityaniswa ngezixhobo ezahlukeneyo ezinje ngeZinc, i-nickel okanye ezinye iingubo zokukhusela. Ezi ziqwengana zinokunyusa ubomi kunye nokuthembeka konxibelelwano olunikiweyo.

• Ukuququmbela

Ukuqonda umahluko phakathi kwentambo yesandla sasekhohlo kunye nendawo elungileyo kunye ne-qued-i-curnas ekhokelayo ibalulekile kubasebenzi be-HY kunye nabathengi bethu ababandakanyekayo kumatshini kunye nemveliso. Ngokukhetha uhlobo lwentambo efanelekileyo yesicelo sakho, unokuqinisekisa unxibelelwano olukhuselekileyo, kwindibano efanelekileyo, kunye nokusebenza ngokugqibeleleyo. Nokuba uyila imveliso entsha okanye ugcine oomatshini abakhoyo, ukuqonda okuqinileyo kwenkcazo yentambo kuya kuyinceda kakhulu uyilo lwakho kunye nomsebenzi womatshini.

HY IzinyithibonelelaUkuyekisa enyeIinkonzo zeMveliso yesiqhelo kubandakanyaIphepha lesinyibilikisi sephepha kwayeUkwenza i-cnc yomatshini, Iminyaka eli-14 yamavakwaye I-8.

Ngokugqwesileyo Umgangathoulawulo,mfutshane Jika ujonge ngemva, kakhuluUnxibelelwano.

Thumela i-rfq yakhongeImizobo eneenkcukachaNamhlanje. Siza kucaphula i-ASAP.

I-WeCAT:i-na09260838

Xelela:+86 15815874097

I-imeyile:susanx@hymetalproducts.com